Roland DR-3 - Manual (Page 64)

64
Chapter 7 Creating Styles
■ Making the TSC Settings for
the Style
Make the TSC (Sound Shape and Ambience)
settings for the style you are creating.
1. Select the style to be set, then press
[EDIT].
The Edit Menu screen appears.
2. Select a <STYLE>, then press [ENTER].
3. Press [ ], select the item to be set.
fig.07-08d
4. Turn the VALUE dial to set the value.
5. When you press [EXIT], the setting is
changed, and you’re returned to the
previous screen.
■ Determining the Number of
Measures for Each Pattern
* Fill-Ins A–C are set at one measure each. This setting
cannot be changed.
1. Press [EDIT].
The Edit Menu screen appears.
2. Select a <STYLE>, then press [ENTER].
3. Press [ ], select a <PATTERN>, then
press [ENTER].
fig.07-06d
4. Press [ ] [ ] to select the pattern to
change the setting.
Select the pattern with “PATTERN MEAS”
displayed the upper part of the screen.
* For more on “PTN KEY TRANS” in the upper row and
the screens that are displayed, refer to “Transposing the
Pattern’s Bass Part” (p. 70).
5. Turn the VALUE dial to select the number
of measures.
You can set patterns to a maximum length of
four measures.
6. When you press [EXIT] twice, the setting
is changed, and you’re returned to the
previous screen.
* When changing the number of measures in a copied
pattern, even though you set the copied pattern so it has
fewer measures than the original pattern, the amount of
data remains the same as that of the original.
Item Value Description
Shape
Sw
ON, OFF
This sets the Sound Shape
On/Off setting to be used
when this Style is selected.
Shape
P1–P8,
U1–U8 This sets the Sound Shape
when this Style is selected.
Ambi
Sw
ON, OFF
This sets the Ambience
On/Off setting to be used
when this Style is selected.
Ambi
P1–P8,
U1–U8 This sets the Ambience
when this Style is selected.