Saving your performance settings (user program) – Roland Digital Grand RG-3F User Manual
Page 34
34
User Program Registration
This instrument lets you save 36 different user programs.
1
Make the desired settings by selecting a tone, etc.
2
Press the [Piano Designer] button so its indicator is lit.
3
Use the [
▲
] [
▼
] buttons to select “6. User Program.”
fig.d-PD6-UserProgram.eps
4
Press the [Enter] button.
5
Use the [
▲
] [
▼
] buttons to select “WRITE.”
fig.d-UP-write.eps
6
Press the [Enter] button.
The following screen will appear.
fig.d-UP-write1.eps
7
Use the [+] [–] buttons to select the destination number (UPG 01–UPG 36).
fig.d-UP-write2.eps
8
Press the [Enter] button.
A confirmation message will appear in the screen.
fig.d-UP-write3.eps
*
To return to the previous screen without saving your settings, press the [EXIT]
button.
9
Press the [Enter] button once again.
The current performance settings will be saved, and you will return to the USER
PROGRAM screen.
10
Press the [Piano Designer] button a number of times until its indicator has
gone out.
Saving Your Performance Settings (User Program)
RG-1F3F_e.book 34 ページ ２０１０年１月１９日 火曜日 午前９時１分