Ricoh FT 1008 - Manual (Page 38)

6. Auto reset duration User mode 6
As a default setting, the copier will reset itself 1 minute after the final
copy is made or after the last time any key is pressed. If a 1 minute reset
time is not appropriate, you can change this time.
Default: 1 minute (Number: 0)
Setting 1 minute 3 minutes
Number 0 1
Off
2
7. Counter up/down User mode 7
The copy counter can be set to show the number of copies made (count
up) or the number of copies remaining to be made (count down).
Default: Up (Number: 0)
S e t t i n g U p Down
Number 0 1
8. Total copy counter
You can check the total number of copies made.
How to check the total copy counter:
User mode
8
Access user tool number “8”. You
will find the first two digits of the
total copy quantity (configured in
six digits) are displayed on the
copy counter.
l
Example: When 12345 copies are made,
is displayed on the copy counter.
l
For the first two digits, the left image
density indicator is lit.
39
96.620. 6:Ol PM