Radio Shack 15-2130 - Manual (Page 4)

INTRODUCTION
3 Introduction / Features
Introduction
Your new Guide Remote* allows you to control your TV, VCR, cable/SAT/DSS
converter, and DVD player, all in one easy to use remote control. The design includes
the functions used most often to operate TV, VCR, Cable converters and Satellite
receivers and DVD Players.
This manual includes a list of 4-digit manufacturer’s codes for TVs, VCRs, Cable and
Satellite converters and DVD players.
The screen on your Guide Remote can provide you instant access to the TV programs
listing, including a brief description of the TV show.
FEATURES
TV Listings – screen on remote provides access to TV program listings.
Program Details – press the GUIDE key to view program details.
Pre-Programmed Code Setup – contains the control codes for most
available brands, including some discontinued devices.
Auto Code Search – select the type of device you need to set up and Guide
Remote will search for the right code.
Code Verification – lets you recall the codes for each device in setup.
Programmable Macro Keys – each macro keys let you send a set of
commands containing up to 32 steps with a single key press.
Punch-Through – gives you the ability to control specific functions of two
different devices without being in the active mode for each device.
Priority-Press – gives you the ability to control the functions for each device
exclusively in the active device mode.
Record Safety – requires a double press of key to prevent accidental
recording.
Battery Saver – remote stops sending IR signal after 30 seconds if a key is
stuck to save battery power.
Code Saver – if batteries are removed or power runs out codes are stored in
memory.