Driver installation – RocketFish RF-P2USB3 User Manual
Page 6
6
3
Locate an available PCI Express slot, remove the screw that secures the
backplate (the small piece of metal that covers the opening for the PCI
card on the back panel of your computer), then remove the backplate. If
you are using a slim desktop, change to the short backplate (included).
4
Carefully insert the adapter into the PCIe x1 slot, seating it firmly into the
slot. Do not touch the metal connector on the adapter.
5
Connect an available floppy 4-pin power plug from your PC's power
supply to the adapter card's 4-pin power connector. Refer to the user
manual for your power supply for information on the correct plug.
6
Secure the adapter to the case using the screw you removed from the
backplate.
7
Reinstall your computer's case cover.
8
Plug in the power cord and other cables, and then turn on your
computer.
Driver installation
Note: The USB 3.0 driver is only for the Windows operating system. It does not support
Mac and Linux operating systems.
To install the driver:
1
Save all files and close all programs. Insert the driver CD (included) into
your optical drive. The driver home page opens.
RF-P2USB3 10-0666_MAN_V1.fm Page 6 Thursday, July 8, 2010 7:03 AM