Raymarine Ray430 User Manual
Page 11
Advertising
2.4.1 Mounting
Options
Flush-mounting your RAY430 can be performed using one of the methods shown below.
Console Mounting Kit (Trim Ring Style-M95995)
Console Mounting Kit (M95990)
Figure 2-3
2.5
ELECTRICAL CONNECTION
Figure 2-4 RAY430 Rear Panel
CAUTION
DO NOT INSTALL THIS RADIO ON VESSELS WITH POSITIVE
GROUND BATTERY SYSTEMS.
2.5.1 DC
Power
Connections
The RAY430 is intended for use on vessels with 12 VDC power systems and can operate as long as
the DC supply is regulated between 10.8 and 16 VDC.
The input power connections are made at the terminal strip on the rear of the RAY430 unit at the
terminals labeled "13.6V" "+" and "–". See Figure 2-8 on page 2-9 for the exact locations.
2-5
Advertising