Roberts Radio MP-SOUND 43 - Manual (Page 39)

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
37
Clock and Alarms .
Setting the clock manually
The MP-43 will automatically set its clock when tuned to a DAB radio station
or to an FM station which is broadcasting the time via RDS.
If the clock cannot be set using DAB or FM radio then you will need to
set the clock manually before the alarm function can be used. The clock
may be set while the unit is in standby mode or while playing. The clock
display is always in 24 hour format.
If it becomes necessary to set the clock manually, please follow these
steps:
1. Press and hold the Clock Set button. The hour digits on the
display will flash.
2. Press the Tuning Up or Down buttons to change the hour digits as
needed. Keep the button pressed to cause the digits to change more
quickly.
3. Press and release the Select button to confirm the hour setting. The
minute digits on the display will flash.
4. Press the Tuning Up or Down buttons to change the minute digits
as needed. Keep the button pressed to cause the digits to change
more quickly.
5. Press and release the Select button to confirm the minutes setting.
The year digits on the display will flash.
1
2,4 2,4
3,5