RCA 3-8120 - Manual (Page 10)

Playing
EN
9
4. Confirm selection.
6. Review program.
7. Erase unwanted tracks.
8. Enter program standby mode.
Display shows total pro-
grammed tracks and time
9. Start program playback.
10. Quit program mode.
1. Press and hold PROGRAM for
about 3 seconds.
Clearing Program
2. Confirm clearing program.
Tips on program:
• Repeat steps 1-4 again if you want to
further edit your program in program standby
mode.
• Opening or closing disc tray will quit from
program mode. Input program will be lost.
• You can also assign your discs with disc titles
& playback programs for recall everytime you
load the discs on the player. (see p.13 for
details)
Tips on general playing:
• Place a CD, audio CD-R or audio CD-RW in the
appropriate tray recess with label side up.
• To avoid music skips or inferior sound quality,
please be sure that the disc is free from dust
particles or scratches.
• An unfinalized disc will not play on tray A.
Program
You can program up to 32 tracks in dual off
mode & 16 tracks in dual on mode in any
desired sequence. Tracks can be programmed
more than once but each time counts as a
track.
1. Enter program mode.
2. Select tray if Dual mode is off.
3. Select track (e.g. 03).
CDR CD
5. Repeat steps 2-4 for more selections.
0 9
ERASE
STOP
PLAY
1
PROGRAM SHIFT
1
PROGRAM SHIFT
OK
OK
1
PROGRAM SHIFT