Russound ST2 - Manual (Page 21)

21
Press and Hold
TNR SEL button
TUNER # BANK # MEMORY #
MEMORY
NAME
SAVE
CHANGES?
Memory Name Procedure
TNR
SEL
Selects
character
Selects
character
position
Repeat
for each
character
in name
TNR
SEL
TNR
SEL
MEM
NAME
Procedure
BANK
NAME
Procedure
SOURCE
NUM
Procedure
Setup
Menu REGION
Procedure
FACTORY
INIT
Procedure
UPDATE
FIRMW
Procedure
SYSTEM
INFO
Procedure
ST2 TUNER PROGRAMMING
ST2 TUNER SETUP MENU
Memory Name (continued)
11. Press Tune Up/Down to select a character
and MEM Up/Down to change a character posi-
tion. Up to 12 characters can be entered one by
one. A blinking LED block indicates the place-
ment of the character being entered.
12. Press BAND when memory name is entered. 13. SAVE CHANGES will appear.
14. Press Tune Up/Down to select Yes or No.
15. Press BAND to save memory name. The
Memory Name menu returns to the Tuner #
prompt to name other presets, or press TNR
SEL to exit the Memory Name menu.