RUSSELL HOBBS Washing Machine RH1247W - Manual (Page 48)

TROUBLE CODE POSSIBLE
FAULT
WHAT TO DO
Water cut-off
or low mains
water
pressure..
- Water faucet may be
closed. Check.
- Mains water may be cut-off.
Check.
- If so, switch the programme
knob to position 0. You can
select a programme and run
your machine after the mains
water is supplied.
- Mains water pressure may
be low. Check.
- Water inlet hose may be
twisted. Check.
- Water inlet hose may be
clogged.
- Clean water inlet hose
filters. (*)
- Valve inlet filter may be
clogged.
- Clean the valve inlet filters.
(*)
If the problem persists,
unplug your machine, turn off
your faucet and contact the
nearest authorised service.
Pump is
faulty or
pump filter is
clogged or
electrical
connection
of the pump
is faulty. - Pump filter may be clogged.
Clean the pump filter. (*)
- Discharging hose may be
clogged or twisted. Check the
discharging hose.
If the problem persists,
contact the nearest
authorised service. (*)
48
SECTION 11: AUTOMATIC FAULT WARNINGS AND WHAT
TO BE DONE