Raypak Power Vent 206-407 - Manual (Page 2)

Catalog No.: 1000.70A Effective: 10-15-07 Replaces: 5-1-05
D-2 Power Vent
For Heater Models 206-407 Heater Model
18-1/8
7-7/8
B
4" DIA
D
11-5/8
Dimensions (in.) Heater
Model
Power Vent
Part No.* B D
206/207 009832 12-3/8 4-1/4
266/267 009832 12-3/8 4-1/4
336/337 009833 18-1/8 7-1/4
406/407 009833 18-1/8 7-1/4
* Part numbers are for 240 VAC units.
Consult factory for 120 VAC units.
NOTES:
1. All units can exhaust flue gases horizontally or
vertically at up to 100 ft. of equivalent length
vent pipe
- 90° elbow = 10 ft. equivalent length
- 45° elbow = 5 ft. equivalent length
2. Vent pipe must meet Category III appliance
venting requirements.
3. Vent pipe sizes are based on 400°F nominal
flue temperature and sea-level operation. For
installation under other conditions, please
consult the factory.