4setting up the web camera, Installing the driver – RocketFish RF-NBCAM User Manual
Page 4
4
Setting up the Web camera
Installing the driver
Note: Install the driver first, then connect the Web camera to a USB port on your
computer.
Windows Environment
To install the Windows driver:
1
Insert the Rocketfish Installation CD into the CD drive in your computer.
The installation program automatically starts.
If the installation program does not start automatically, click Start, Run,
type D:\Setup.exe (where “D” is your CD drive), then press Enter. The
installation screen opens.
2
Click Driver, then follow the on-screen instructions.
3
Install DirectX from the CD, if necessary.
Note: To remove the Windows driver, click Start, All Programs, Rocketfish, then click
Uninstall
. Follow the on-screen instructions to remove the driver.
RF-NBCAM - combined.fm Page 4 Friday, August 11, 2006 11:27 AM