Renesas Emulator MCU Board for 38D5 Group M38D59T-RLFS - Manual (Page 4)

(4/4)
7. Precautions
IMPORTANT
Notes on This Product:
We cannot accept any request for repair.
When using the oscillator circuit on the M38D59T-RLFS, check the output waveform of pins Xout and Xcout by an
oscilloscope.
When mounting an oscillator circuit on the M38D59T-RLFS, make sure that 2 mm or more of a DIP pin does not
appear on the rear face (solder side). It may be short-circuited with the DIP pin of the converter board.
For inquiries about the product or the contents of this manual, contact your local distributor.
Renesas Tools Homepage http://www.renesas.com/en/tools
8. External Dimensions
64.0
45
.0
5.
4
9.
2
12
.5
CN
2
VCC GND RESET +
R1
C6
C5
R5 R6
Figure 5 External dimensions
9. Connecting to the User System
M38D59T - RLFS
80-pin 0.8-mm-pitch
PRQP0080GB-A (80P6N-A)
LCC socket
(not incluede)
80-pin 0.8-mm-pitch
PRQP0080GB-A (80P6N-A)
80-pin 0.5-mm-pitch
PLQP0080KB-A (80P6Q-A)
M3T-F160-80LCC
(included)
M3T-F160-80NRA
(not included)
M3T-F160-80NSD
(not included)
Figure 6 Connecting to the user system