Inserting microsd memory card, Turning on the camcorder – RCA EZ2000BK User Manual
Page 10
9
9
3. Inserting microSD memory card
•
A microSD memory card (not included) is recommended for recording as the camcorder internal
memory will only permit minutes of recording time.
Lift up the cover
Push the card in
until a click is heard
As the memory card is small in size,
it is recommended to use a small
coin to help insert or remove it.
•
The card icon ( ) appears on the screen with memory card inserted.
•
To remove card, push card in until a click is heard, then slowly release the card. As card is under minimal
tension when locked in memory slot, please use care when removing.
4. Turning on the camcorder
•
Slide and hold the power switch until the camcorder turns on.
Slide and
hold
•
"Ready" shows on the LCD screen when the camcorder is ready for recording.
Battery indicator (recharge
when the icon is empty)
Memory card
indicator
Recording quality
•
Slide and hold the power switch to turn off the camcorder.
•
The camcorder will automatically turn off after 3 minutes if not in use.
•
Refer to the following pages for more information on recording and other operations.
•
The camcorder has internal memory which only permits minutes of recording time. A
microSD memory card is recommended for recording.
•
Recordings are saved in the internal memory when microSD memory card is not installed.
•
Once microSD memory card is inserted, new recordings will be saved on the memory card.
•
In playback mode, the camcorder will playback recordings stored in the microSD memory card. To
playback recordings in the internal memory, remove the microSD card.