Riccar BRILLIANCE BRLS - Manual (Page 6)

8 9
Operation Operation
Vacuuming carpet
• For carpet cleaning, press the “on / off”
switch on and press the “carpet” switch
on. Both lights should be lit.
Vacuuming hard surfaces
• For bare floor cleaning (i.e. tile, wood, or
linoleum), turn the main “on / off” button
on and the “carpet” switch to floor. Only
the “on / off” button light should be on.
Carpet height adjustment
There are various carpet height settings
available designed for numerous flooring
surfaces.
• Locate the height adjustment dial just
above the right rear wheel, and rotate
the dial to the desired height.
Model BRLP
X Hi
Plush carpets
High Medium pile carpet
Auto General setting
Floor Hard floors
X Low Low pile carpet
Model BRLD and BRLS
High
Medium pile carpet
Auto General setting
Floor Hard floors
Low Low pile carpet
• If it becomes difficult to push the vacuum
across the carpet, adjust the dial to a higher
carpet setting.
Brushroll auto shut-off feature
Note: When the Brilliance is turned on and
in the upright position, the brushroll will not
spin as to eliminate the possibility of damage
to floor surfaces. The brushroll will spin when
the handle is lowered, provided the “carpet”
switch is on.
Press
Press
Press
Press
Carpet Cleaning Bare Floor Cleaning
(Wood, Tile, etc.)