Roland FC-300 User Manual
Owner’s manual
Advertising
201a
Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” (p. 2)
and “IMPORTANT NOTES” (p. 4). These sections provide important information concerning
the proper operation of the unit. Additionally, in order to feel assured that you have gained a
good grasp of every feature provided by your new unit, Owner’s Manual should be read in its
entirety. The manual should be saved and kept on hand as a convenient reference.
202
Copyright © 2007 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the
written permission of ROLAND CORPORATION.
Owner’s Manual
FC-300_e1.book 1 ページ ２００７年４月２４日 火曜日 午前１０時１０分
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- USING THE UNIT SAFELY
- IMPORTANT NOTES
- Introduction
- Standard Mode
- Control Change Mode
- System Exclusive Mode
- Patch Mode
- Other Features
- Setting the System Parameters
- Adjusting the LCD Contrast
- Reducing Battery Consumption (Economy Mode)
- Setting the Method Used for Transmitting Program Change messages in Standard Mode (PC Mode)
- Using the [] [] Pedals to Make the Settings
- Limiting the Range of Banks That Can Be Switched (Bank Extent)
- Setting the [] [] Pedal Step Size
- Setting How Numbers are Indicated
- Setting the Polarity of the AMP CONTROL Jacks
- Determining the Role of an EXP PEDAL/CTL Jack
- Switching the Function of the MODE Pedal Jack
- Switching How the Pedal Indicators Light
- Setting the MIDI Transmit Channel
- Setting the Device ID
- Setting the Bank Select Output
- Setting the Bank Select Value
- Transmitting Data to an External MIDI Device (Bulk Dump)
- Receiving Data from an External MIDI Device (Bulk Load)
- Setting the System Parameters
- Appendices
- MIDI Implementation
- Specifications
- Index