Radio Shack 32-2059 User Manual

Page 2

Advertising
background image

2

The Basics

3

The Basics

contents

getting to know your equalizer

3

features 4

back of equalizer ...................................................... 6
front of equalizer ..................................................... 8

important safety instructions (UL 6500) 9
before you begin

13

connecting your equalizer

14

connecting input sources ........................................ 14
connecting output sources ..................................... 14
connecting REC output ........................................... 15
using the ground lift switch .................................... 15

using your equalizer

16

replacing the fuse .................................................... 17

caring for your equalizer

18

FAQs 18
product specifi cations

19

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
THE COVER OR BACK. NO USER-SERICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED PERSONNEL.

The lightning symbol is intended to alert you to the
presence of uninsulated, dangerous voltage within this
product’s enclosure that might be of suffi cient magnitude
to constitute a risk of electric shock. Do not open the
product’s case.

The exclamation symbol is intended to inform you that
important operating and maintenace instructions are
included in the literature accompanhing this product.

!

WARNING: To reduce the
risk of fi re or shock hazard,
do not expose this product
to rain or moisture

CAUTION

!

RISK OF ELECTRIC SHOCK

DO NOT OPEN

getting to know your equalizer

Your new equalizer can enhance your sound system in the
following ways:

• Remedy any system suffering from rumble or low

frequency below 30Hz overload by attenuating the
lowermost equalizer controls so that you will not miss
any of the music.

• Eliminate or reduce noise due to scratches on record

surfaces or even the hiss on a tape by bringing down
the control level at 9 kHz. You can even compensate
for the boosted highs on Dolby processed tape or
encoded FM Broadcasts.

• Equalize the tonal quality of broadcast stations if they

attenuate or accentuate either highs or lows.

• Adjust the controls to accommodate high

performance recording tapes that require special
equalization in playback.

• Correct turntable cartridge or speaker inadequacies

for pleasant listening.

• Find the appropriate equalizer control and adjust it up

or down a few dB.

• Adjust the equalizer to accommodate voices or music.

Advertising