RCA F25339 - Manual (Page 17)

Chapter 2 15
Using the Remote Control
Tip
To turn off all the RCA, GE,
and PROSCAN components
that are connected to the
TV, press ON•OFF twice
within two seconds.
This feature only works
with most RCA, GE and
PROSCAN products.
PLAY If you’re operating a VCR or DVD player, plays the disc or videotape.
RECORD If the remote is in VCR mode, press RECORD to start recording.
REVERSE If you’re operating a VCR or DVD player with the remote control,
press REVERSE to go backwards on a disc or videotape.
SAT•CABLE Puts the remote in SAT•CABLE mode.
SKIP If you press this button before you change the channel, the TV waits 30
seconds and automatically goes back to the original channel. Each time you
press SKIP, you add 30 seconds (i.e, if you press SKIP two times before you
change the channel, the TV waits 60 seconds and automatically turns back to
the original channel).
SOUND Toggles between the available sound modes for compatible TVs.
STOP If you’re operating a VCR or DVD player, stops playing the disc or
videotape.
TV Turns on the TV and puts the remote in TV mode. Also displays channel
information.
VCR1 Puts the remote in VCR1 mode.
VCR2 Puts the remote in VCR2 mode.
VOL (up and down) buttons Decrease or increase the TV’s volume.