Radio Shack MD-981 - Manual (Page 25)

25 Troubleshooting
No sound when receiving
and playing MIDI data. MIDI cables are not con-
nected properly. Check the connection.
Bass notes in General
MIDI data are sent out
one octave lower. Tone map parameter is set
to
N .
Set the tone map parameter to
G (see “Changing MIDI Set-
tings” on Page 22).
Sounds sent to another
MIDI device by the key-
board do not sound cor-
rect. The other device’s MIDI
THRU function is turned
on. Turn off the MIDI THRU func-
tion on the other device.
Trouble Possible Cause Remedy
42-4042.fm Page 25 Friday, April 28, 2000 11:18 AM