Roksan Audio Caspian INTEGRATED CD PLAYER User Manual
Page 7
PLAYING A DISC
When a disc has been loaded, your Caspian CD Player will briefly spin the disc while it studies the data encoded
on it. The disc will then stop and the display will indicate the number of tracks on the disc and the total play time.
After about 10 seconds the display will revert to:
TRACK MIN SEC
There is a Play/Pause Button (3, 8) on each side of the central drawer mechanism. Their operation is identical
and interchangeable.
To commence playing a disc, press Play/Pause Button (3 or 8) once. The disc will play from the beginning.
To pause the disc whilst it is playing, press the Play/Pause button (3 or 8) a second time. Pressing the button
again will resume playback from the point at which Pause mode was entered. In Pause mode, the disc continues
spinning and the laser will still be operational but locked. Please keep the CD Player in Pause mode no longer
than strictly necessary.
SELECTING A TRACK
Press the Track Forward Button (7) to go to the next track on the disc. Pressing the Track Back Button (6) will
take you to the previous track.
When the disc is playing, press the Track Back Button once to take you to the beginning of the current track and
a second time to take you to the start of the previous track.
Press the Track Forward Button (7) to take you forward to the start of the next track.
Once the procedure is complete the disc will commence playing from the selected track.
When a disc is first loaded you can use these buttons to choose your track. Having done so, press the
Play/Pause Button and your disc will commence playing from the selected track.
You may select a track when Pause is engaged. In this case, the disc will revert to Pause after the procedure is
complete and you will have to press Play/Pause Button to continue playing the disc.
When a disc reaches the end, it will stop and the display will revert to:
TRACK MIN SEC
Roksan Audio ltd
Caspian Integrated CD Player User Manual
CLASSIFICATION: General Use
Version 2.01
All specifications are liable to change without notice. E&OE
Page 7 of 11
ENGLISH