Replacing the light bulb, When not in use – Rangemaster U110121 - 01A User Manual

Page 19

Advertising
background image

17

replacing the light Bulb

n

n

Disconnect the appliance from the power supply

before replacing the light bulb.

There is an interior light in the top of the refrigerator section.
Remove the bulb housing cover, by gently pulling the clip

away from its slot (Fig.5-3). Then slide the cover off, removing

the lugs on the cover from the bulb housing.
Change the present light bulb with a new one. The

replacement bulb should not have a greater rating than 15 W.
Replace the light cover and after waiting five minutes,

reconnect to the mains supply.

When not in use

If you are not using the appliance for an extended length

of time, it is recommended that you switch off the electrical

supply, empty any food out, clean the inside of the appliance

and leave the door ajar.
This will save energy, and also prevent a build up of stale

odours inside.

Light bulb

Bulb housing

Bulb cover

Fig.5-3

Advertising