Ramsey Electronics VHF Low Noise Preamp Kit PR100 - Manual

PR100 y 1
VHF LOW NOISE
PREAMP KIT
Ramsey Electronics Model No. PR100
• Extensive filtering for low noise operation, 1dB
noise figure!
• Three section tuned circuit and double helical filter
• Centered on 145 MHz and is 2.8 MHz wide
• 16dB Gain
• Perfect match for any VHF Receiver
• Powered through antenna feed line, or separately
• Runs on 12VDC
• Designed to fit inside of 1 1/2” PVC for quick and
easy mounting
Boost up those weak signals without adding in unwanted noises!
The PR100 has a three section tuned circuit and a double helical
filter to allow only the desired signal to be amplified, while
attenuating signals outside the band. A perfect match for any 2
meter receiver!