Radio Shack 14-1265 - Manual (Page 13)

13 Preparation
ing an adapter that does not meet
these specifications could damage
the cassette player or the adapter.
• Always connect the adapter to the
cassette player before you connect it
to the power source. When you fin-
ish, disconnect the adapter from the
power source before you disconnect
it from the cassette player.
1. Set the adapter's voltage switch to
3V.
2. Insert the Adaptaplug into the
adapter's socket. Line up TIP on the
plug with +POS on the socket.
3. Insert the barrel plug into the cas-
sette player's DC 3V jack.
14-1265.fm Page 13 Wednesday, July 5, 2000 10:02 AM