Troubleshooting – Royal Sovereign ARP-1400WW User Manual

Page 13

Advertising
background image

arp-1400blS, 1400WW

13

TRouBlESHooTINg

problem

possible reasons

Air Conditioner does not operate

- Check and reset the power plug. Wait 3 minutes and try to run the unit again.
- The batteries in the remote may need to be replaced. Replace the batteries and try to run the unit again.
- Make sure the plug is properly plugged into the outlet.
- The set temperature may be too close to room temperature. Lower the set temperature.
- The air outlet may be blocked. Check the air outlet and remove any items that may be found.

Air Conditioner runs but does not cool

- Check the room for open doors or windows and close them.
- There may be another appliance in the room giving off heat. Check the room and turn off the appliance.
- The air filter may be dirty. Check the filter and clean if necessary.
-∙The∙air∙exhaust∙or∙intake∙may∙be∙blocked.∙∙
- The set temperature may be too high. Check the set temperature and reduce it if necessary.

Air Conditioner does not run

and water full indicator is lit

-∙There∙may∙be∙excess∙water∙in∙the∙unit.∙Drain∙the∙unit.

Advertising
This manual is related to the following products: