RoyalTek RN1 - Manual (Page 9)

9
Chapter 2 Getting Started
This chapter describes the hardware interface of the RoyalTek RN1 and its peripherals. Instructions for
setting up the device and some basic system operations are also discussed.
NOTE: Although the RN1 rechargeable Li-Polymer battery comes approximately 30% charged, before
using, it is best to connect the AC adapter (Optional Accessory) or USB cable by PC connect and plug to
power socket and fully charge the battery. The ON/OFF button will be orange when charging and green
when change done.
2.1 Hardware overview
This section introduces the RN1 PND external features and hardware components.
2.1.1 Packing list
The RoyalTek RN1 box contains all of the items listed below：
RN1 Portable Navigation Device
Car mount Car holder
Car charger