Radio Shack 33-1185 - Manual (Page 7)

7
OPERATION
LISTENING SAFELY
To protect your hearing, follow these
guidelines when you use headphones.
• Set the volume to the lowest setting
before you begin listening. After you
begin listening, adjust the volume to
a comfortable level.
• Do not listen at extremely high vol-
ume levels. Extended high-volume
listening can lead to permanent
hearing loss.
• Once you set the volume, do not
increase it. Over time, your ears
adapt to the volume level, so a vol-
ume level that does not cause dis-
comfort might still damage your
hearing.
USING YOUR
HEADPHONES
1. Turn on the audio source.
Note: If connecting headphones
does not automatically disable the
audio source’s speakers, turn off the
speakers.
2. If you connected the transmitter to
an audio source's headphone jack
(or a jack that is controlled by the
audio source's volume control), set
LEVEL on the back of the transmitter
about midway, then rotate the audio
source's volume control until the
indicator at the front of the transmit-
ter flashes. If the indicator does not
flash, rotate LEVEL clockwise until
the indicator flashes.
If you connected the transmitter to
an audio source's line output jack
(or a jack that is not controlled by
the audio source's volume control),
rotate
VOL on the headphones fully
counterclockwise, then rotate LEVEL
until the indicator flashes rapidly or
remains lit.
Note: Some audio sources might
not make the indicator flash. For
these sources, rotate
LEVEL all the
way to the left.
3. Press the head-
phones' POWER
ON/OFF button to
turn on the head-
phones. The
POWER indicator
on the left earpiece
lights.
4. Rotate TUNE until
the STEREO indi-
cator on the right
earpiece lights.
5. Put on the head-
phones and adjust
VOL on the right
earpiece to the
desired listening
level.
33-1185.fm Page 7 Wednesday, November 10, 1999 10:29 AM