Ryobi RY70105 - Manual (Page 5)

5
SYMBOLS
TECHNICAL DATA
Weight Without fuel and cutting attachment ...................................................................................................... 6.3 Kg
With blade ........................................................................................................................................... 6.62 Kg
With string head .................................................................................................................................. 6.49 Kg
Fuel tank volume ................................................................................................................................................... 42.5 cm 3
Cutting swath .......................................................................................................................................................... 457 mm
Engine displacement ................................................................................................................................................ 30 cm 3
Maximum engine performance (in accordance with ISO 8893) ............................................................................... 0.78 kW
Maximum rotational frequency of the spindle .................................................................................................... 10000 min -1
Engine Speed (rotational frequency) at recommended max. spindle rotational frequency .................................. 12500 min -1
Engine speed (rotational frequency) at idle ............................................................................................... 2000 - 2500 min -1
Fuel consumption (in accordance with ISO 8893) at max. engine performance ................................................... 0.52 kg/h
Specific fuel consumption (in accordance with ISO 8893) at max. engine performance ...................................... 0.47 kg/h
Vibration level idling - Front Handle ......................................................................................................................... 3.7
Rear Handle .......................................................................................................................... 4.2
Vibration level racing Front Handle ......................................................................................................................... 9.3
Rear Handle .......................................................................................................................... 7.1
Sound pressure level (in accordance with EN ISO 11806:1997, ISO 7917:1987) ............................................................ 97
Sound power level (in accordance with ISO 10884) ....................................................................................................... 112
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations
with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any
danger. The instructions or warnings they give are not substitutes for proper accident prevention measures.
SYMBOL MEANING
DANGER:
Indicates an imminently hazardous situation which, if not avoided, will result in death or
serious injury.
WARNING:
Indicates a potentially hazardous situation which, if not avoided, could result in serious
injury.
CAUTION:
Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury. It may also be used to alert against unsafe practices that may cause property damage.
NOTE: Advises you of information or instructions vital to the operation or maintenance of the equipment.
SAVE THESE INSTRUCTIONS
Switch On/Off Switch
I = ON to Run
O = OFF to Stop
SYMBOL NAME EXPLANATION