Radio Shack TAD 3809 - Manual (Page 19)

19 Operation
Notes:
• Be sure to set each digit within 8 seconds of the last. Other-
wise, the TAD exits setup and you must start again from
Step 1.
• We recommend you not use three identical digits (such as
999) for the security code. Such numbers are too easy for
others to guess.
• If AC power fails or if the backup battery becomes weak,
the remote operation security code automatically resets to
799.
Remote Answer-On
1. Dial your phone number.
If the TAD is set to Answer-Off, it answers the call after 10
rings and announces, “Answer off.”
If the TAD is set to Answer-On, it answers according to the
number of rings you set.
2. Within 8 seconds, enter the remote operation security
code. The TAD beeps. (If you do not enter the code within 8
seconds, the TAD disconnects.)
3. Press # .
If you have not recorded an OGM, the TAD answers the
call after 10 rings and announces, “Answer off, no
announcement.” Record an OGM (see “Using Remote
Commands”).