Renesas PCA4738HF-64 - Manual (Page 7)

( 5 / 18 )
WARNING
Warning for Use Environment:
• This equipment is to be used in an environment with a maximum ambient temperature of 35˚C. Care
should be taken that this temperature is not exceeded.
• Select the proper programming mode of the PROM programmer.
CAUTION
Cautions to Be Taken for This Product:
• Do not disassemble or modify this product. Personal injury due to electric shock may occur if this
product is disassembled or modified.
• Use caution when handling this product. Be careful not to apply a mechanical shock such as falling.
• Do not directly touch the connector pins of this product.
• Be careful with the static electricity when handling this product and the MCU.
When Not Using This Product for a Long Time:
• Attach the connector pins of this product to the conductive sponge.
• Put it into a conductive polyvinyl, and keep it in the package case shipped from the factory.
• Store it in the place where humidity and temperature are low and direct sunshine does not strike.
IMPORTANT
When Using The Product:
• Attach this product to the IC socket on the PROM programmer properly.
• Insert the MCU to the IC socket of this product properly.
• When opening and closing the IC socket of this product, be sure to keep it horizontal.
• Be sure to set the programming area as described in this instruction manual.
• Do not use the PROM programmer's device identification code readout function.