ROTEL RB-951 MkII User Manual

Page 5

Advertising
background image

5

WARNING: There are no user serviceable parts inside.
Refer all servicing to qualified service personnel.

WARNING: To reduce the risk of fire or electric shock,
do not expose the unit to moisture or water. Do not
allow foreign objects to get into the enclosure. If the
unit is exposed to moisture, or a foreign object gets
into the enclosure, immediately disconnect the power
cord from the wall. Take the unit to a qualified service
person for inspection and necessary repairs.

Read all the instructions before connecting or operating the com-
ponent. Keep this manual so you can refer to these safety in-
structions.

Heed all warnings and safety information in these instructions
and on the product itself. Follow all operating instructions.

Clean the enclosure only with a dry cloth or a vacuum cleaner.

You must allow 10 cm or 4 inches of unobstructed clearance around
the unit. Do not place the unit on a bed, sofa, rug, or similar sur-
face that could block the ventilation slots. If the component is placed
in a bookcase or cabinet, there must be ventilation of the cabinet
to allow proper cooling.

Keep the component away from radiators, heat registers, stoves,
or any other appliance that produces heat.

The unit must be connected to a power supply only of the type
and voltage specified on the rear panel of the unit.

Connect the component to the power outlet only with the sup-
plied power supply cable or an exact equivalent. Do not modify
the supplied cable in any way. Do not attempt to defeat ground-
ing and/or polarization provisions. Do not use extension cords.

Do not route the power cord where it will be crushed, pinched,
bent at severe angles, exposed to heat, or damaged in any way.
Pay particular attention to the power cord at the plug and where
it exits the back of the unit.

The power cord should be unplugged from the wall outlet if the
unit is to be left unused for a long period of time.

Immediately stop using the component and have it inspected and/
or serviced by a qualified service agency if:

• The power supply cord or plug has been damaged.

• Objects have fallen or liquid has been spilled into the unit.

• The unit has been exposed to rain.

• The unit shows signs of improper operation

• The unit has been dropped or damaged in any way

Place the unit on a fixed, level surface strong enough to support
its weight. Do not place it on a moveable cart that could tip over.

English

Advertising