Connecting to external devices, Viewing videos on tv – RCA EZ4000RD User Manual
Page 23
Advertising
22
Connecting to external devices
Viewing videos on TV
1. Plug in the AV cable (provided) – Insert the single connector end into the camcorder (AV jack) and
connect the double connector ends to the corresponding video (yellow) and audio (white) input jacks
on the TV.
1
2
3
Follow below steps to lift up the cover:
Open the cover
2. Turn on the TV and the camcorder.
3. Switch the TV to the selected video input.
•
Refer to your TV manual for instructions.
4. You may play and delete videos viewed on the TV by using the camcorder buttons.
The default TV output standard is NTSC. You can switch it to PAL standard by going to the
camcorder menu. Refer to "Menu settings" for more information.
Advertising