Step 2: charging your rio – Rio Audio Rio 800 User Manual
Page 11
®
Page 11
Setting up your Rio
Step 2: Charging your Rio
Caution:
Do not remove the rechargeable battery from the
backpack.
1
Connect the AC adapter into your Rio’s backpack port at the
bottom of the backpack.
2
Connect the AC adapter power cord into an electrical outlet. The
charge lamp on the backpack lights up when charging begins.
3
Slide the Rio power switch to On.
4
Press Menu and select Prefs > Battery > Calibrate.
Note:
You do not have to calibrate the battery each time you
charge it—only the first time.
5
Wait overnight or until the timer expires to give the backpack a full
charge.
6
When charging is complete, unplug the AC adapter from the Rio.
7
Plug the headphones and headphone remote into the top of the Rio,
slide the power switch to On, and press
>/||
to listen to the Rio
introduction message.
prism.book Page 11 Tuesday, November 21, 2000 4:02 PM