RCA TC1500 - Manual (Page 14)

EN
5
Connecting to Computer
Charging the Battery
The player’s battery can only be charged
through the USB port of a computer.
1. Slide the USB connector upward as
shown below.
2. Insert the USB connector of the player
into the USB port on the computer
tightly (use an optional USB extension
cable if necessary). Once connected,
the display shows as below:
3. Press and hold to enter battery
charging mode. The display shows as
below with the battery icon
animating.
• Charge the unit for at least 2 hours
before first use.
• You can still transfer files to the player
in the battery charging mode.
• When the battery is full, the display
shows “Battery full”.
Transferring Files to the
Player
You should refer to the software manual
for details in software installation,
connecting your player with the
computer and transferring files to the
player.
Note
Refer to the software
instruction manual for
procedures in installing music
management software and transferring
files to the player.
Note
The player will automatically
go to battery charging mode if
the battery level is low.
USB Connected
Hold to charge batt.
USB Connected
Attention
Do not disconnect the USB
connection during music
download. Doing so may corrupt system
files or the files being downloaded.