ROTEL RDV-1050 - Manual (Page 19)

19 English
3 Press ENTER 35 . Subtitles are displayed
in the selected language. The subtitle se-
lection window disappears.
NOTES: An SVCD disc can have up to
four subtitles. Pressing / 32 14 cycles
through those channels regardless of
whether the subtitles are recorded or not.
The subtitle selection window will auto-
matically disappear if you do not change
the subtitle for several seconds.
For DVD VIDEO, the selected language
may be abbreviated on the TV screen. See
“Appendix B: Table of languages and their
abbreviations”.
Changing the Audio
Language or Sound (AUDIO)
The audio selection setting allows you to change
the audio language of a movie, or to listen to
karaoke with or without the vocal. At the be-
ginning of the part where multiple audio tracks
are recorded,
appears on the TV screen
(except when the ON SCREEN GUIDE pref-
erence is set to OFF).
1 During playback, press AUDIO 24 . The
audio selection window appears on the TV
screen.
2 Press / 32 14 or AUDIO to select the
desired audio. Each time you press /
or AUDIO, the audio changes.
For DVD VIDEO (example)
For SVCD
For Video CD
3 Press ENTER 35 . The selected audio is
heard and the audio selection window dis-
appears.
NOTES: The audio selection window will
automatically disappear if you do not
change the audio within several seconds.
For DVD VIDEO, the selected language
may be abbreviated on the TV screen. See
“Appendix B: Table of languages and their
abbreviations”.
Simply press the AUDIO-fs/Rate button
24 , do not hold it down. If this button is
pressed and held for a few seconds the
sampling frequency and quantization bit
length is shown in the display window.
Selecting a Scene Angle
(ANGLE)
You can view a variety of scene angles if the
DVD VIDEO disc contains “multi-angle” parts,
where multiple cameras were used to shoot
the same scene from different angles. At the
beginning of a “multi-angle” part,
ap-
pears on the TV screen (except when the ON
SCREEN GUIDE preference is set to OFF).
1 During playback, press ANGLE 6 . The
angle selection window appears on the TV
screen.
2 Press / 32 14 or ANGLE to select the
desired angle. Each time you press /
or ANGLE, the angle changes.
3 Press ENTER 35 .
You will see the picture from the selected angle.
The angle selection window disappears.
NOTE: The angle selection window will
automatically disappear if you do not
change the angle for several seconds.
Special Picture/Sound
Effects
To Zoom In On Pictures
1 During playback or while paused, press
ZOOM
25 . Pressing ZOOM causes the
RDV-1050 to zoom in on the image. At the
top left of the screen, the information for
the current magnification appears for about
5 seconds. Each time you press ZOOM, the
magnification is doubled (1.8, 4, 8, 16, 32
and 64 times).
When a picture of a DVD VIDEO disc is
viewed on a normal TV screen (4:3, Letter
Box), black bars may appear at the top and
bottom of the screen. In this case, if you select
the “ZOOM x1.8” mode, the black bars be-
come almost invisible. When a 1:2.35 or
1:1.85 DVD VIDEO source is played back,
however, the black bars are visible on the
screen.
2 Press / / / 32 14 13 33 to move
the zoomed position.
To return to the normal playback press
ENTER
35 .
NOTE: When you are zoomed in on a pic-
ture the image may look coarse.
22 RDV-1050 DVD Player
Page Selection PAGE
During playback, selects the subtitle language.
1 Open the pull-down window.
2 Press / 32 14 to select a page.
3 Press ENTER 35 to begin playback with
the selected page.
Menu Bar Functions for
DVD VIDEO
Time Mode Selection
During playback, selects the time mode shown
in the display window and in the status bar.
Press ENTER 35 to select the time mode from
the following.
TOTAL: Current title elapsed time
T.REM: Current title remaining time
TIME: Current chapter elapsed time
REM: Current chapter remaining time
Repeat Mode
Selects the repeat mode during playback.
1 Open the pull-down window.
2 Press / 32 14 to select the repeat
mode from the following.
CHAPTER: Current chapter repeat
TITLE: Current title repeat
A-B: A-B repeat
OFF: Repeat mode deactivated
3 Press ENTER 35 to make the selected re-
peat function active.
Time Search
Specifies a time from the beginning of the cur-
rent title from which to begin playback.
Chapter Search
During playback, specifies a desired chapter
to be played back from.
1 Open the pull-down window.
2 Press numeric buttons 4 (0 to 9) to enter
a desired chapter number. (For example,
to specify “10,” press 1, then 0.)
3 Press ENTER 35 to begin playback from
the specified chapter.
Audio Selection
During playback, selects the audio language
or sound track.
1 Open the pull-down window.
2 Press / 32 14 to select a desired audio
language or sound track.
3 Press ENTER 35 to begin playback with
the selected audio.
Subtitle Selection
ON
OFF
During playback, selects the subtitle language.
1 Open the pull-down window.
2 Press / 32 14 to select a desired sub-
title language.
3 Press ENTER 35 to begin playback with the
selected subtitle.
Angle Selection
During playback, selects a scene angle in a
multi-angle part.
1 Open the pull-down window.
2 Press / 32 14 to select a scene angle.
3 Press ENTER 35 to begin playback with the
selected scene angle.
Menu Bar Functions for
SVCD/Video CD/Audio CD
Time Mode Selection
Selects the time mode shown in the display
window and in the status bar.
Press ENTER 35 to select the time mode from
the following.
TIME: Current track elapsed time
REM: Current track remaining time (while in
stop mode, current track total time)
TOTAL:
Disc elapsed time
T.REM: Disc remaining time (while in stop
mode, disc total time)
Repeat Mode
Selects the repeat mode.
1 Open the pull-down window.
2 Press / 32 14 to select the repeat
mode from the following.
TRACK: Current track repeat
ALL: All track repeat
A-B: A-B repeat
OFF: Repeat mode deactivated
3 Press ENTER 35 to make the selected re-
peat function active.
Time Search
Specifies a time from the beginning of the disc
as the point from which to begin playback.
Program Playback PROG.
While stopped, specifies the playback order
of tracks.
Random Playback RND.
While stopped, activates random playback.
Audio Selection
During SVCD/Video CD playback, selects the
audio channel(s).
1 Open the pull-down window.
2 Press / 32 14 to select a desired audio
channel(s).
3 Press ENTER 35 to play back with the se-
lected audio channel(s).
Subtitle Selection
ON
OFF
During SVCD playback, selects the subtitle.
1 Open the pull-down window.
2 Press / 32 14 to select a desired sub-
title.
3 Press ENTER 35 to begin playback with
the selected subtitle.
Menu Bar Functions for
DVD-RAM/DVD-RW Written
in the VR Format
Time mode selection
Selects the time mode shown in the display
window and in the status bar.
Press ENTER 35 to select the time mode from
the following.
TIME: Current title/play list elapsed time
REM: Current title/play list remaining time
Repeat Mode
Selects the repeat mode.
1 Open the pull-down window.
2 Press / 32 14 to select the repeat
mode from the following.
PG: Current title repeat
ALL: All titles repeat
OFF: Repeat mode deactivated
Original Program Title Search
PG
During playback, specifies a desired title (for
original playback) to be played back from.
1 Open the pull-down window.
2 Press numeric buttons (0 to 9) 4 to enter
a desired title or play list number. (For ex-
ample, to specify “10,” press 1, then 0.)
3 Press ENTER 35 to begin playback from
the specified title/play list.