Radio Shack Auvio 16-912 - Manual (Page 5)

8
O
ve
rv
ie
w
9
S
e
tu
p
Setup
Install Remote Control Batteries
1. Press the tab to remove the battery cover.
2. Insert two AAA batteries (not supplied) as indicated by the polarity symbols (+ and –)
marked on the remote control.
3. Replace the battery cover.
b
Battery Notes:
Dispose of batteries promptly and properly. Do not burn or bury them.
Use only fresh batteries of the required size and type.
Do not mix old and new batteries, different types of batteries (alkaline, or rechargeable),
or rechargeable batteries of different capacities.
If you do not plan to use the remote control for a long time, remove the batteries.
Batteries can leak chemicals that can damage electronic parts.
Connect AC power
Connect your TV to a standard wall outlet using the supplied AC power cord.
n
Note: The remote works best within of 20 ft (6 m) of the TV.
POWER – Turn the TV
on or to standby.
SOURCE – Select an
available video input
source.
f – Return to the previous
channel.
EXIT – Exit the menu.
MENU – Access the TV menu.
VOL +/–
Decrease or increase the
volume.
CH 
Select next /previous channel.
SLEEP – Set the sleep timer.
ASPECT – Select the screen size.
S. MODE
Select an audio preset.
P. MODE – Select a
video preset.
CC – Turn closed captions on/off.
INFO – Turn show
information on or off.
Number Buttons (0-9)
Set the channel or enter
password.
– Dash
Use for multicast channels.
 – Navigate menus.
OK – Make selections.
FAV – Display a list of
favorite channels.
MUTE – Turn sound off or on.
FREEZE – Pause live TV.
AUDIO LIST
Switch between audio channels,
if available.
CH. LIST
Display a list of channels saved in
Tuner memory.
ADD/ERASE
Add or delete a Favorite channel.
AIR–CABLE
Switch broadcast type.
EPG
View scheduled programming
for the current channel.
MTS – Select alternate audio if
available.
LED Indicator – Blinks red
while remote is in use.
AAA AA
A