Rosen Entertainment Systems Rosen inVUE II - Manual (Page 21)

21
Rosen Entertainment Systems
LISTENING OVER THE CAR SPEAKERS
Each time the vehicle is started, the ClearVue II FM Modulator
remains off until turned on by the user. This allows normal
use of the vehicle’s audio system.
To listen to ClearVue II system audio through your car
speakers:
1 Press SPEAKER until FM ON appears on the screen.
2 Turn on the car radio.
3 Tune the car radio to the FM frequency 88.7; this is the
default system frequency.
If audio from the DVD player or VCR does not play over the car
speakers, tune the radio to 89.1 FM. This is an alternate
system frequency.
To turn off ClearVue II system audio over the car speakers,
press
SPEAKER . FM OFF appears on the screen. Audio from
the ClearVue II system is then available over the headphones
only.
WATCHING BROADCAST TELEVISION
(ON TV TUNER-EQUIPPED SYSTEMS)
You can watch television on ClearVue II systems equipped
with source units with internal TV Tuners.
Note: Broadcast television reception varies with location,
terrain, distance from the broadcast tower, and other factors.
Signal quality is likely to vary in a moving vehicle.
DVD Player Systems
1 Press SOURCE until TV and a channel number (for ex-
ample, “2”) appear on the screen.
2 Press the UP CH and DOWN CH arrow buttons on the
remote to change channels.
VCR Systems
1 Press SOURCE until CH__ (for example, “CH 2”) appears
on the screen.
2 Press the UP CH and DOWN CH arrow buttons on the
remote to change channels.