Installation on a macintosh (apple mac os), Mac os 9.x or mac os 10.x with firewire or usb, Mac os 10.2 or 10.3 with firewire 800 or usb 2.0 – Rosewill RX30 User Manual
Page 10: Unplug procedure, N on a, Acintosh, X or, X with a, Irewire or, Connection
If the system
doesn’t recognize
the drive, turn on
the power first,
before connecting
the USB/Firewire
cable.
For Mac OS 8.6,
the USB extension
has to be at least
v1.41.
For Mac OS 8.6,
the Firewire
extension has to be
at least v2.6.
For save removal of
your drive and to
assure that no data
is lost, always
follow the unplug
procedure. If not, an
error message will
show up.
Installation on a Macintosh (Apple Mac OS)
Mac OS 9.x or Mac OS 10.x with a Firewire or USB
connection:
• Turn on your computer and start Mac OS
• Connect the RX30 and turn it on
• No driver installation required
• The external drive will mount and show up on your
desktop**
Mac OS 10.2 or 10.3 with a Firewire 800 or USB 2.0
connection:
• Turn on your computer and start Mac OS
• Connect the RX30 and turn it on
• No driver installation required
• The external drive will mount and show up on your
desktop**
Unplug Procedure:
• Drag the external hard drive icon into the trash bin
• Turn off your device
** For factory new drives and formatting, see “Partitioning &
Formatting”
Copyright . 2004 by Rosewill Inc. - www.rosewill.com
- 8 -