RCA Mobile Video Cassette Player - Manual (Page 14)

Using the System
12 Chapter 2
Using AUX Jacks
You can view an image from an external source (like a
camcorder) using the player’s A/V input jacks.
A/V Jacks
There are three A/V input jacks and three A/V output jacks on
the player’s rear jack panel.
You can connect an external device like a game console or
camcorder into the A/V input jacks.
Note: Make sure to stop all tape playback in the player
before connecting an auxiliary device to the player’s A/V
input jacks.
You can connect the player to another device like a VCR using
the A/V output jacks.
Using an External
Monitor
Your player has a monitor port in the rear
which provides DC 12V and A/V output in one
DIN socket. Connect the the unit via the
monitor port to an external monitor or TV
(monitor cable not included).
CAUTION: For vehicle use, connect the
mobile video player only to a factory
equipped compatible display. To
determine full compatibility, check the
owners user guide provided by your
vehicle manufacturer.
Damage can occur using a non-compatible
monitor if it does not have a fully
compatible 8-pin input jack. For the
specific wiring function of each electrical
pin within the jack, see the illustration at
left.
8PIN DIN JACK
8 7
6 5 4
3 2 1
PIN ASSIGNMENT
1. POWER (DC 12V) OUTPUT
2. N.C or IR REPEAT OUTPUT
3. POWER (GND) OUTPUT
4. VIDEO OUTPUT
5. VIDEO GND
6. AUDIO R OUTPUT
7. AUDIO GND
8. AUDIO L OUTPUT