RCA RT2350BK - Manual (Page 8)

Getting Started
EN
5
Digital Connections
Read instructions carefully when connecting compo-
nents to the receiver.
Digital In Jacks can accept Dolby Digital (AC-3), DTS
(RT2600 only) or PCM signals when compatible
components are connected.
Connecting the Antennas
The AM and FM antennas connect to the AM and FM
terminals on the system’s back panel.
They must be hooked up in order to receive clear
reception.
AM Loop Antenna and FM Indoor Antenna
1. Uncoil the Antenna wire and locate the base end
of the AM antenna and snap into place as shown
below in AM Loop Antenna.
2. Press down on the Antenna tab to open the termi-
nal
AM Loop Antenna
OPTICAL 1
6 CH. EXTERNAL INPUT SUBWOOFER PRE OUT
FR
SR
SUB
FL
SL
CEN
RT2600 ONLY
RT2600 ONLY
OPTICAL 2
OPTICAL 1
OPTICAL 2
SAT / DVD / CD Player / TV
COAXIAL DIGITAL IN (AUDIO)
Connect to coaxial digital output of
DVD, CD, SAT or other compatible
devices.
OPTICAL DIGITAL IN (AUDIO)
Optical Fiber Cable
Connect to optical digital output of
DVD, CD, SAT or other compatible
devices.
DVD / CD / SAT
RT2600 ONLY
HINT
• For FM reception, extend antenna to its full
length and arrange the Antenna as a T Shape
• For AM reception, rotate the antenna hori-
zontally to get better reception.
ANTENNA
AM
LOOP
FM
75Ω
OPTICAL 1
OPTICAL 2
6 CH. EXTERNAL INPUT SUBWOOFER PRE OUT
FR
SR
SUB
FL
SL
CEN
RT2600 ONLY
RT2600 ONLY