Roberts Radio CR9945 - Manual (Page 14)

Changing the backup battery
1. Purchase a replacement lithium backup battery type CR2032 or
equivalent.
2. Remove the fresh battery from its packaging so that it is ready to
install.
3. Important. Maintain connection to AC mains supply during battery
replacement. This will provide power whilst the original battery is removed.
4. Use a small screwdriver to remove the two small screws securing the
battery holder on cabinet back.
5. Remove the battery holder from cabinet.
6. Remove old battery from holder. Replace new battery with + sign
facing left side of radio when viewed from cabinet rear.
7. Replace the holder into cabinet back.
8. Refit the two small screws to secure holder and check that the “Batt
Low” indicator is not lit.
13