Rosewill RC-401 - Manual (Page 2)

1
User Manual PCI-E Gigabit Ethernet Adapter RC401
Key Features
• Media Access Controller(MAC):
- 10/100/1000 Mbits/s triple-speed operation
- Compatible with IEEE® 802.3, 802.3u, 802.3x, 802.3ac, 802.1q, and VLAN
- IEEE 802.3x frame-based flow control
- PXE 2.0 support
- Wake on LAN
• PCI Express Revision 1.0a Interface:
- Full compliance with Revision 1.0a
- Single-lane, 2.5 Gbits/s full-duplex channel
- Multiple traffic classes support
- Advanced error reporting
- 64-bit and 32-bit platform support
- End-to-end CRC(ECRC) support
• Agere TruePHY technology
- 10Base-T/100Base-TX/1000Base-T gigabit Ethernet copper transceiver
- Automatic speed negotiation and downshift
• Software:
- Windows® 2000, Windows® XP device drivers
Package Contents
• 1 x Gigabit Ethernet Adapter
• 1 x User Manual
• 1x Driver CD
Driver Installation
1. After the hardware is installed, turn on your PC. Windows® will detect the ET1310 Gigabit
Ethernet Card and find a “Ethernet Controller” device. When Windows® asks “What do
you want the wizard to do?”, click the “Cancel” to cancel the driver installation for this
device. This driver will be installed from the included Driver CD.
2. Insert the Driver CD into the CD-ROM drive of your computer.
Browse to the ET1310 Driver Folder “\LAN\ET1310\Windows” on the Driver CD, then
double-click the installation file “Setup.exe”. Follow the on-screen instructions to finish the
driver installation.
Thank you for purchasing Rosewill Product.
Please register your product at www.rosewill.com for complete warranty information and future
support for your product.