Roberts Radio CR9951 - Manual (Page 5)

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
4
4. Adjust the volume by rotating the Volume control.
3. Tune in to the desired station by rotating the Tuning control.
The station frequency is indicated by the LED dial pointer.
The Wire aerial located on the rear of your clock radio is for FM
reception. The wire should be fully extended and positioned for
optimum reception.
For MW and LW reception there is a built-in ferrite aerial. Rotate
your clock radio to the position giving best reception.
2. Select the required waveband using the Waveband selector
switch.
Listening to the Radio
1. Turn on the radio by sliding the Function switch to the 'On '
position. The LED dial pointer will light up indicating that the
radio is switched on.
5. The radio can be switched off by sliding the Function switch to
the 'Off ' position.