Russound PR-4Zi - Manual (Page 7)

7
Wiring Instructions
CONNECTING VIDEO MONITORS
Each PR-4Zi zone has a composite video output to allow viewing video from any of six A/V sources.
Connect monitors as shown in Figure 5 using RG6U cable with RCA type connectors. If more than two
monitors are being used in a zone, a composite video distribution amplifier is recommended. The PR-
4Zi video outputs are buffered and are good for up to 100’ of RG6U.
Figure 5 – Video Output connections
Figure 6 – Source Loop outputs
SOURCE LOOP OUTPUTS
The PR-4Zi has six buffered, fixed-level
audio/video outputs (Figure 6). When set
to SOURCE LOOP OUT, these output sig-
nals from the corresponding input source.
This source loop configuration allows the
PR-4Zi to pass source signals to another
component, such as a home theater con-
troller, or to another PR-4Zi for sharing
sources in a multiple controller system.
PR-4Zi manual 6/18/02 12:58 PM Page 7