Roland TD-3KW - Manual (Page 11)

11
USING THE UNIT SAFELY
fig.FD-8.e
• The tips of the anchor bolts are sharp. Handle with care.
• When using on flooring, the anchor bolts may damage
the floor. Do not attach the anchor bolts.
• When the FD-8 is not going to be used for a long period
of time, move and fix the arm, allowing longer travel for
the pedal.
• To avoid damage, do not leave the FD-8 for extended
periods of time with the pedal plate depressed.
Using the FD-8, you can control the opening and closing of the
hi-hat sound.
Open Hi-Hat
Strike the hi-hat without pressing the pedal
Half Open Hi-Hat
Strike the hi-hat with the pedal pressed half-way
Closed Hi-Hat
Strike the hi-hat with the pedal pressed
Foot Closed
Completely press down the pedal
The volume of the Foot Closed sound can be adjusted
separately (TD-3 Owner’s Manual; p. 42).
• Connect the FD-8 to the TD-3 before turning on the
power.
• Do NOT press the pedal when turning on the power.
FD-8
Dimensions: 130 (W) x 396 (D) x 103 (H) mm
5-1/8 (W) x 15-5/8 (D) x 4-1/16 (H) inches
Weight: 1.3 kg
2 lbs 14 oz
Accessory: Tuning Key
FD-8
(Hi-Hat Control Pedal)
Anchor Bolt
Pedal Plate
Control Out Jack
shallow
deep
Shift the Arm
Adjusting the Travel of the Pedal
Attaching the Anchor Bolts (When Using on the Carpet)
Anchor Bolt
Spring for
the Anchor Bolt
Loosen the nut with a tuning key.
After adjusting, tighten the nut.
Using the FD-8
Specifications
TD-3KW_e.fm 11 ページ ２００７年６月１９日 火曜日 午後３時１２分