Radio Shack 22CH GMRS/FRS - Manual (Page 7)

O
perat
ion
7
2. Insert the supplied adapter’s barrel
plug into the DC 6V 500mA jack on
the back of the radio.
3. Route the adapter’s cord into the
strain relief groove on the back of
the radio, then plug the adapter
into a standard AC outlet.
4. Place the radio’s two keyhole slots
over the screws and slide the unit
down to secure it.
5. Raise the antenna to a vertical
position.
OPERATION
Rotate VOLUME to turn on/off the radio
and to adjust the volume.
S
ELECTING A
C
HANNEL
To manually select a channel, press
e /SCAN or d /CALL . The selected
channel number appears. See
“Transmit Frequencies and Power” on
Page 8.
To scan through the channels, hold
down
e /SCAN until SCAN appears. The
radio automatically scans through the
channels and pauses on each active
channel.
BUSY appears when a call is
being received. Press any button
except
e /SCAN or d /CALL to stop
scanning.