Ricoh Aficio 3235C EN User Manual
Page 150
Appendix
144
8
Problem
Solutions
Is the Data In indicator
blinking or lit after starting
the print job?
If not, data is not being sent to the machine.
❖
❖
❖
❖ When the machine is connected to the computer using
the interface cable
Check the machine port settings are correct. For parallel port
connection, port LPT1 or LPT2 should be set.
• Windows 95/98/Me
A
Click the [Start] button, point to [Settings], and then click
[Printers]
.
B
Click the icon of the machine. On the [File] menu, click
[Properties]
.
C
Click the [Details] tab.
D
In the [Print to the following port:] list, confirm the correct
port is selected.
• Windows 2000
A
Click the [Start] button, point to [Settings], and then click
[Printers]
.
B
Click the icon of the machine. On the [File] menu, click
[Properties]
.
C
Click the [Ports] tab.
D
In the [Print to the following port(s)] list, confirm the correct
port is selected.
• Windows XP Professional, Windows Server 2003
A
Click the [Start] button, and then click [Printers and Faxes].
B
Click the icon of the machine. On the [File] menu, click
[Properties]
.
C
Click the [Ports] tab.
D
In the [Print to the following port(s)] list, confirm the correct
port is selected.
• Windows XP Home Edition
A
Click the [Start] button, click [Control Panel], click [Print-
ers and Other Hardware]
, and then click [Printers and Faxes].
B
Click the icon of the machine. On the [File] menu, click
[Properties]
.
C
Click the [Ports] tab.
D
In the [Print to the following port(s)] list, confirm the correct
port is selected.
• Windows NT 4.0
A
Click the [Start] button, point to [Settings], and then click
[Printers]
.
B
Click the icon of the machine. On the [File] menu, click
[Properties]
.
C
Click the [Ports] tab.
D
In the [Print to the following port(s)] list, confirm the correct
port is selected.
❖
❖
❖
❖ Network connection
Contact your network administrator.
JupiterC2EN-Print-F2_FM.book Page 144 Friday, December 17, 2004 8:17 PM