Rosewill IDE 3-in-1 - Manual (Page 3)

2
User Manual IDE 3-in-1 (5.25”,3.5”,2.5”)to USB 2.0 Cable Converter Adapter RCW607
drive will automatically mount itself. That being said, this is not true for all Operating Systems and
a good knowledge of how your OS works is needed. In some systems a drive utility is needed
to format or partition the mechanism and or mount the drive. New Mechanisms all need to go
through the format and partition routine in order to be used. Also note that drives from different
computers, i.e. (Macintosh to/from Windows) will not be recognized unless a third party utility is
used. Without such a utility the OS may think that the drive has no data on it and ask to be re-
formatted. This of course would destroy all the data on it.
Connecting IDE 3.5” Hard Drives
3.5” IDE Mechanisms
The 3.5” IDE drive has two connectors on the rear. The larger, 40 pin connector is IDE DATA while
the smaller, 4 pin connector is for Drive Power. Plug in the DrivePower connector. This connector
has cut corners and must be installed with the correct orientation. Make sure the power switches
are in the off position and that the LED’s in the switch box are not illuminated.
Next plug in the larger IDE Data connector located on the Cable Adapter. This 40 pin connector is
keyed and can only be inserted in one direction. Plug the USB Connector into the computer and
turn the power switch on.
Connecting IDE 5.25” CD/DVD
5.25” IDE CD/DVD Mechanisms
The 5.25” IDE CD/DVD drive has two connectors on the rear. The larger, 40 pin connector is IDE
DATA while the smaller, 4 pin connector is for Drive Power. Plug in the DrivePower connector.
This connector has cut corners and must be installed with the correct orientation. Make sure the
power switches are in the off position and that the LED’s in the switch box are not illuminated.
Next plug in the larger IDE Data connector located on the Cable Adapter. This 40 pin connector is
keyed and can only be inserted in one direction. Plug the USB Connector into the computer and
turn the power switch on.
Connecting IDE 2.5” Hard Drives
2.5” IDE Mechanisms
The 2.5” IDE Drive has one connector on the rear. The 44 pin connector is IDE DATA and IDE
Power combined. This connector has a blocked socket and must be installed in the correct
orientation. Match the blocked socket with the missing pin on the drive mechanism.
2.5” IDE Drive mechanisms get their power from the USB port. In this case, the Universal Power
Supply is not needed.