RAD Data comm AMC-101 - Manual (Page 14)

Chapter 1 - Introduction AMC-101 Installation & Operation Manual
1-4 General Applications
A single AMC-101 in WRAP mode can be used for double conversion
between single mode and multimode fiber for a dual attached FDDI station
or concentrator (see Figure 1-3).
Figure 1-3 WRAP: Dual Single Mode (SM) to Multimode (MM) Conversion
A single AMC-101 equipped with a single interface in WRAP mode can be
used for conversion between single mode and multimode fiber
(see Figure 1-4).
ATM Switch
1300 nm Single Mode 1300 nm Multimode
ATM Switch
AMC-101
in WRAP Mode
Figure 1-4 Single Interface SM to MM (Wrap)