Roland PCR-80 - Manual (Page 151)

151
Edit mode (EDIT)
BULK
Controller assignments can be received or transmitted as bulk data.
* When you transmit or receive Bulk data, the contents of the current memory will be lost. Save the current
memory settings as needed before you perform this operation.
■ Receive mode
fig.edt
1
Press the [EDIT] button.
The display will indicate “EDT”.
2
Press the [BULK] key.
fig.blr
The display will blink “BLR” (Bulk Receive).
3
Confirm what’s indicated and press the [ENTER] button.
fig.rs
The display will indicate “RS”, and the “S” will blink.
4
Use the [DEC] [INC] buttons or the [0] [1] keys to select the mode.
5
Confirm what’s indicated and press the [ENTER] button.
fig.rs1
The third digit of the display will blink, and the PCR-30/50/80 will wait
to receive bulk data.
0 SINGLE BULK
A memory will be received as bulk data.
The received data will overwrite the current
memory. Memories 1–F will not be affected.
1 ALL BULK
All memories will be received as bulk data.
The received data will overwrite memories 1–F.