RCA L46FHD35 - Manual (Page 37)

Using the TV’s Menu Chapter 4
37
Sound Mode Provides special processing through your speakers (depending on the setting
you chose as your Sound Type). The available sound modes are:
Off Does not give any special sound processing.
SRS WOW Gives a surround effect with more bass. (available for models L42FHD37,
L46FHD37, and L46FHD35)
SRS TurSurround XT (available for models L42FHD38, L46FHD38, L52FHD38, and
L40FHD380)
Dynamic Bass Improves bass output. Displays a choice list of available settings you can
adjust: Off and On.
Balance Press the right or left arrow buttons to adjust how much audio is sent to the left and
right speakers.
Auto Volume Level Reduces the annoying blasts in volume during commercial breaks, and
also amplifies softer sounds in program material. Eliminates the need to constantly adjust the
volume.
Internal Speakers Turn on or off the internal speakers. If you have a device connected to the
AUDIO OUTPUT jacks on the back of the TV and you want to control the sound by the device
instead, uncheck the box.
Advanced Settings
Second Audio Program (SAP) Plays the program’s audio in a second language, if one is
available. The letters SAP appear in the channel banner when you tune to a program that is
broadcast with SAP information. SAP audio is broadcast in mono. SAP is also used to
broadcast a program’s audio with descriptions of the video for the visually impaired.
Default Audio Language Choose the language you prefer for dialog on digital channels.
If your preferred language is being broadcast with a program, then the TV plays it. If not,
then the TV plays the default audio for the program (usually English in the U.S.). The default
digital channel audio language options are English, Spanish, French, German, and Italian.
Current Audio Track (not available for analog channels) Press the right arrow to
choose from the audio languages available for the program you're watching. The lan-
guage you choose becomes your preferred audio language for all digital channels until
you turn the TV off. If the language you choose here is not being broadcast with a
program, then the TV plays the default audio for the program (usually English in the U.S.).
Note: This menu will gray-out when current channel selected is analog.
Advanced Settings
Go Back
SAP
Default Audio language English
Current Audio Track